Tutorial

Launching the vc|one

You can watch this tutorial at any time with your velocate-app by clicking on the info-button in the top right corner (iOS) or the velocate-icon (Android).

Scope of delivery

The velocate vc|one consists of

  • the velocate vc|one backlight
  • a modified USB-charging cable

The device is charged when delivered – we recommend charging the tracker once via USB-cable before the installation.

In order to do this, you just have to connect any cable end (+/- is neglectable) to the backlight. Following this, you just connect the USB-plug to your mobile phone charging device or PC.

After a few seconds, the light turns on.

Only necessary for the first time:

Before the very first launch, it is necessary to press down on the push button on the backside of the device for 10 seconds (see picture) with a paper clip, in order to set the device to operating mode. When successful the tracker with light up and beep shortly.

Info: Connecting to your bike 

IMPORTANT! When connecting to your bike (especially to your dynamo) the vc|one must not be connected DIRECTLY (without an additional consumer) to the dynamo (without a front light). The dynamo will otherwise generate a too high voltage which destroys the protective circuit of the tracker!

velocate vc|one

explained in videos

Launching velocate vc|one (hardware)
velocate_intro Please ignore this message of your sim card has already been activated. In order to activate your sim card, please send a mail containing the SIM-ICCID to [email protected](?) OK    Send mail  

Connecting VELOCATE with the app

The connection between VELOCATE and your smartphone will be established via blue tooth. The following video explains how this works.

Your standardized password for the blue tooth connection is “oooo

Connecting VELOCATE with the app

Tip:

In case the tracker is not found immediately, you can conduct the following measures:

  • switch blue tooth off and on in phone settings
  • Clear blue tooth stack. Watch the following video.

 

Activation of the VELOCATE service

Activation of the SIM-chip

The activation of the integrated SIM-chip has to be conducted only ONCE. In order to activate go to settings (cog), scroll all the way down and click on “Activate SIM-card”. After a few minutes, the tracker should be online.

Please reboot your device once before completing the process.

velocate_intro Please ignore this message of your sim card has already been activated. In order to activate your sim card, please send a mail containing the SIM-ICCID to [email protected](?) OK    Send mail